Products
Products by Category
|
3 5mm To 2 5mm Headset Adapter Cable 3 5mm Input To 2 5mm Output No Wire
|
Tripp Lite PV150 Inverter, 12V Dc Input To 120 Ac
|
|
Item #: 462643621
Price: 33.20
Retail price: 45.00
|
| Tripp Lite PV150 Inverter, 12V Dc Input To 120 Ac Tripp Lite PV150 Inverter, 12V Dc Input To 120 Ac Features: • 12V DC input; 120V AC output; 1 outlet • 150 watts continuous output • 300 watts peak output (instantaneous) • Convenient cigarette lighter plug |
|
Garmin EmapEtrex PC/DC Adapter PC Interface Cable/Cigarette Lighter adapter
|
|
Item #: 455063008
Price: 44.98
Retail price: 49.98
|
| A powerful connection between your PC and your GPS receiver. Simply plug into compatible units and you can download routes, waypoints, and other additional map info. Plus, a built-in adapter to power your GPS with your vehicles cigarette lighter. |
|
General Wire P-MR-D Mini-Rooter Basic Unit with 75' x 1/2" cable and Power Cable Feed
|
|
Item #: 455378753
Price: 700.45
Retail price: 820.20
|
| General Wire P-MR-D Mini-Rooter Basic Unit with 75' x 1/2" cable and Power Cable Feed The General Wire P-MR-D Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 75' x 1/2" cable (50EM3), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-D Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-D Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable. |
|
General Wire P-MR-C Mini-Rooter Basic Unit with 50' x 1/2" cable and Power Cable Feed
|
|
Item #: 455378750
Price: 648.02
Retail price: 758.80
|
| General Wire P-MR-C Mini-Rooter Basic Unit with 50' x 1/2" cable and Power Cable Feed The General Wire P-MR-C Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 50' x 1/2" cable (50EM3), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-C Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-C Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable. |
|
General Wire P-MR-B Mini-Rooter Basic Unit with 75' x 3/8" cable and Power Cable Feed
|
|
Item #: 455378748
Price: 652.76
Retail price: 764.35
|
| General Wire P-MR-B Mini-Rooter Basic Unit with 75' x 3/8" cable and Power Cable Feed The General Wire P-MR-B Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 75' x 3/8" cable (75EM2), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-B Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-B Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable. |
|
General Wire P-MR-A Mini-Rooter Basic Unit with 50' x 3/8" Cable and Power Cable Feed
|
|
Item #: 455378747
Price: 619.20
Retail price: 725.05
|
| General Wire P-MR-A Mini-Rooter Basic Unit with 50' x 3/8" Cable and Power Cable Feed The General Wire P-MR-A Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 50' x 3/8" cable (50EM2), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-A Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-A Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable. |
|
LG VX8550 Stereo Headset + Adapter [OEM] SGEY0003602
|
|
Item #: 458311765
Price: 14.99
Retail price: 19.99
|
| 100% brand new OEM hands-free stereo headset with On / off switch. Stereo headset allows you to enjoy your music / sound directly from your phone while keeping your hands free! Included adapter converts the phone's own audio output into a universal 3.5 mm output. 3.5 mm output means unlimited possibilities of device to broadcast the audio sound/music from your phone Adapter allows connection to any 3.5 mm stereo headset and portable speaker Adapter also allows your phone / PDA to connect to any home stereo system Brand: OEM / LG Model No.: SGEY0003602 Color: Silver Gray Features Built in microphone and volume control Talk / End / Last call button on the microphone Heavy duty spring loaded clip Package includes 3.5 mm stereo headset 2.5 mm to 3.5mm Headset Adapter & Microphone Accessory ONLY. Phone not included. Compatible with:AX260 Scoop / AX300 / UX380 WAVE / AX490 / AX565 / UX565 / AX8600 / VX8600 / VX9900 EnV / LX550 FUSIC / LX260 RUMOR / UX260 SCOOP / LX535 / MM-535 / LX570 Muziq / UX300 / VX10000 VOYAGER / VX10K / VX8000 / VX8100 / VX8300 / VX8350 / VX8550 Chocolate / VX8800 Venus / VX9400 / VX9800 the V |
|
OEM Motorola 2.5mm Headset Audio Adapter (SYN1505A)
|
|
Item #: 456788344
Price: 10.99
Retail price: 10.99
|
| Is your new Motorola cell phone not compatible with the headset you have? Now it can be! Use this genuine Motorola audio adapter to convert the Mini-USB audio jack found on RAZRs, PEBLs, SLVRs etc. into a standard universal 2.5mm headset jack. • Genuine original Motorola product (SYN1505A/SYN1505)
• Fits any standard/universal 2.5mm wired headset
• Brand new, 30-day money-back guarantee; 1-year warranty
• NOTE: Not compatible with wired headsets featuring ''mic Volume control'' or ''mic mute control'' (Earpiece volume control works fine). Also 2.5mm standard is for Mono audio, not Stereo. Don't pay retail prices for the same product at the store! Order with us and we'll ship it first-class for FREE. Don't forget, we guarantee your satisfaction for every purchase at CellphoneAccents.com. ORDER NOW! |
|
Blackberry 3.5mm Headset Adapter w/Mic & Send/End Button
|
|
Item #: 459706857
Price: 10.99
Retail price: 10.99
|
| Is your new Blackberry cell phone not compatible with the headset you have? Now it can be! Use this audio adapter to convert the 2.5mm audio jack found on Blackberry phones into a standard universal 3.5mm headset jack. FEATURES: - Fits any standard/universal 3.5mm wired headset
- Brand new, 30-day money-back guarantee; 1-year warranty
- Includes microphone and send/end button
- Compatible w/All Blackberry Phones with 2.5mm Port
Don't pay retail prices for the same product at the store! Order with us and we'll ship it first-class for FREE. Don't forget, we guarantee your satisfaction for every purchase at CellphoneAccents.com. ORDER NOW! |
|
General Wire ER-A Easy Rooter Basic Unit with 75' x 3/4" Cable, 75' x 1/2" Cable in Small Cage, and COCS-R Combination Cutter Set
|
|
Item #: 455364574
Price: 1637.11
Retail price: 1917.00
|
| General Wire ER-A Easy Rooter Basic Unit with 75' x 3/4" Cable, 75' x 1/2" Cable in Small Cage, and COCS-R Combination Cutter Set The General Wire ER-A Easy Rooter Includes: Easy Rooter ER Basic Unit including Machine Frame, 1/3 HP Capacitor Motor, Large Cage, Ground Fault Interrupter, Air Foot Switch, Safety Slip clutch, Leather Gloves, How-To Video, 20' Power Cord, one 75' x 3/4" Cable, one 75" x 1/2" Cable in Small Cage; and COCS-R Combination Cutter Set. General Wire ER-A Easy Rooter Features: The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with roll bars to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large zinc-plated cage holds 100' of 3/4" or 5/8" Flexicore cable, while optional smaller cage holds 100' of 1/2" cable. An extra-long plated folding handle quickly locks in place, making it much easier to wheel the Easy Rooter to the job, without sacrificing the compact size needed for easy loading in a car trunk. The Easy Rooter rolls smoothly on big 10" ball bearing wheels mounted on a half inch reinforced axle. Power is supplied by a 1/3 hp motor with capacitor start, thermal overload protection, and reverse switch. Standard safety features include an air-actuated foot pedal, ground fault circuit interrupter, and safety slip clutch. Wire Rope Center Construction: Heavy-gauge wire coiled tightly around 42-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. General Wire ER-A Easy Rooter Basic Unit Specifications: • Weight: 80 lbs without cable. •.Large Cage: Zinc plated 100' of 3/4" capacity with heavy duty roller bearings. • Small Cage: Zinc plated 100' of 1/2" capacity with iolite bronze bushings. • Motor: 1/3 HP heavy duty, capacitor start, thermal overload protection, Forward/Off/Reverse Switch. • Safety Slip Clutch: Protects cable and operator. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 20', 3 wire, vinyl covered with molded plug. Equipped with ground fault circuit interrupter. • Wheels: 10" semi-pneumatic with roller bearings. • Cables: 3/4" for 4-10" lines; 5/8" for 3-6" lines; 1/2" for 2-3" lines and 4" lines without roots. • Cutter Set: Spear Head, 2" U-Cutter, 3" Heavy-Duty Side Cutter, 3" Heavy-duty Saw Blade, Large Retriever, Arrow Head, 1-1/2" U-Cutter and Small Retriever. • Leather Gloves: With reinforced palm for hand protection. |
|
|
